Telephone: 0800 2983838
Email: This email address is being protected from spambots. You need JavaScript enabled to view it.
Online Enquiry
Banners and Displays, Covers and Logistics Materials, and Marquees

Flexible Post Mounted Banner Poles

Boldscan’s range of flexible banner arms which flex in high winds and create wind-spill thus protecting the banners and reducing the loading on the lamp-post.

Key to the BannerFlex systems ability to withstand high winds is the unique and patented ‘cantilever’ arm and casting design, which holds the banner under constant tension. When the wind blows, the force is immediately transferred from the taught banner to the fibreglass arms, which then flex and help dissipate the energy. This all important wind spill factor is crucial in protecting the banner from excessive wear and greatly reduces the forces exerted onto the lamp column

The system comprises of 2 tempered cast aluminium brackets and 2 UV treated fibreglass arms. The universal bracket allows the BannerFlex system to be mounted on almost any type of pole, regardless of shape or surface, using stainless steel geared straps, traditional banding or bolts. The arms slide into the brackets and are held in place by stainless steel set screws; a hitch pin offers an added safety feature. The quality materials eliminate corrosion, discolouration and peeling of paint. BannerFlex can accommodate one or two banners per pole.

BannerFlex Standard D3

BannerFlex Standard D3
metro-airow-asda

Bannerflex Standard D3 is ideally suited to pole diameters of 120mm and over and/or to accommodate a maximum banner size of 750mm x 3000mm.

Key Features:

  • Durable Almag alloy bracket with 4 diametric screws and hitch pin to hold banner arm securely in place.
  • UV treated fibreglass banner arms: removable and adjustable, flex under wind loading allowing air to spill off the outside of the banner thus reducing stress on the banner and lamp column.
  • Unique canted banner arm design: Top arm is canted up, bottom arm is canted down, and when banner is installed the canted arms put the banner under tension to transfer wind force to the fibreglass. Produces a taut, tight and trim banner appearance with no ‘flopping’ or ‘sagging’
  • Tested to withstand up to 120mph wind force.
  • Banner arms can be supplied in any length to suit banner size required.
  • Universal bracket for installation onto round/square/octagonal/fluted lamp standards.
  • Integral cast loop for anchoring banner with nylon-ties.
  • Available in black powder-coated finish if preferred.
  • Can accommodate one or two banners per pole.
  • Engineered for durability with no moving or mechanical parts to wear-out.
 

BannerFlex Metro Airow

self-tensioning-front-view

self-tensioning

The BannerFlex Metro was specifically designed in response to requests for a smaller but adjustable system designed for use on all small to mid-sized diameter lamp columns. The system boasts all of the features of the Standard BannerFlex D3 but in a more compact form.

Ideally suited to pole diameters of 76mm and over and/or to accommodate a maximum banner size of 750mm x 2000mm

Key Features:

  • Attractive, streamlined design with integrated banding ports
  • Weather resistant aluminium alloy bracket with 4 diametric screws and hitch pin to hold banner arm securely in place
  • UV treated fibreglass banner arms (CNC tapered or 19mm diameter round): removable and adjustable, flex under wind loading allowing air to spill off the outside of the banner thus reducing stress on the banner and lamp column
  • Unique canted banner arm design: Top arm is canted up, bottom arm is canted down, and when banner is installed the canted arms put the banner under tension to transfer wind force to the fibreglass. Produces a taut, tight and trim banner appearance with no ‘flopping’ or ‘sagging’
  • Tested to withstand up to 120mph wind force.
  • Banner arms can be supplied in any length to suit banner size required.
  • Universal bracket for installation onto round/square/octagonal/fluted/tapered lamp standards.
  • Integral cast loop for anchoring banner with nylon-ties.
  • Available in black powder-coated finish if preferred.
  • Can accommodate one or two banners per pole.
  • Engineered for durability with no moving or mechanical parts to wear-out.